Monday, December 16, 2013

MG 1/100 Unicorn WIP# 1

This is a project i intend to first try out full pearl powder, also my entry for Blue Frame Vs Unicorn Group Build.

Start engine!!!!!

Really dislike the original angle of the .... horn. Too straight upwards.

Seperated the horn with its connector. Change to a angle i prefer.


Ok job done. From side and front.

Ok, now need to think of a way to cover up the empty space due to the shifting of position of the horn. Option one will be making either an extra lens/sensor.

Am using epoxy glue and acrylic paint to create the lens. This is mainly due to the transparency n the body which the epoxy glue manage to provide.

Start mixing with one part of the glue, and it had become very scary as the resin turn into an opaque liquid....

But! surprisingly, once added with hardener, viola! the whole solution become clear again!!!!

This is what i got. The clear n the color actually looked pretty impressive. Besides that, it did give a bery nice body. However, a few problems that made me finally decided to call it off:
1) the bubble trapped inside
2) Though it gives nice body, but it tends to to too round on the top and the side. Yes, it is suitable for building gems or something, but for a mechanical lens, no.

 Yeah, agree........ YUCKS!

Added a small puny horn......

After that, decided to turn the sides to destroy mode. This is the easiest way to expose a little bit of psychoframe... Hohoho!

Added a antenna thingy at the back...well, unicorn mode side looks good, but thinking of the psychoframe part, in the end, decided to go back to original plan.....

Final Stage for the head.........

Saturday, December 14, 2013

Tamiya 1/24 Jaguar MKII Racing

This is a very old Tamiya kit, yes, old.

There are several problems encountered during this build:
1. The decal was a total lost. Luckily for 1950's there were not much of sponsors for racing. In the end I had gotta use decal recovery fluid to save the decal. This cause another problem which s the decal had become very thick n gloss coat cannot cover it 100%

2. The clear part, especially the bigger ones like the front n back windscreen. It cause very distorted images when look through it. But there s pretty much nothing i could do about it....

3. The chrome part. Tamiya is famous for its beautiful chrome. However, if there s any reason u need to wash them off, it's hell, especially if u need to remove the inside layer too. Luckily, it took me some time, n i couldn't make it 100% clean, it looks kinda alright in the end, with the help of Alclad's chrome.

Other than that, it's basically Tamiya's great model kit. Is very fun to build, accurate, though for AMS modelers, it might be too simplified.

Hope u like it! :)


 photo P1011696.jpg  photo P1011689.jpg  photo P1011667.jpg  photo P1011665.jpg  photo P1011666.jpg  photo P1011688.jpg  photo P1011684.jpg  photo P1011683.jpg  photo P1011676.jpg  photo P1011680.jpg  photo P1011672.jpg  photo P1011671.jpg  photo P1011677.jpg

Monday, December 9, 2013

DX SD Unicorn

I first saw this in HongKong and really in love with this kit's proportion.

Is by a China company, labeled DX.

A midget proportion, transformable (Unicorn & Destroy Mode), and an extremely simple n easy lighting setup. It even comes with two sets of clear runners for the psychoframe.

However, the building process isn't really the best. The transformable design makes it even worse.

Done in a month time. After finish, I must say the finished kit really makes me think all the trouble is nothing!


 photo Untitled-3.jpg photo P1010742.jpg  photo P1010743.jpg  photo P1010734.jpg  photo P1010731.jpg  photo P1010760.jpg  photo P1010726.jpg  photo P1010749.jpg  photo P1010748.jpg  photo P1010727.jpg

Monday, December 2, 2013

G-System 1/35 Ex-S Gundam

This is my first resin Gundam, done in 2009.

Nothing much to shout about: pretty standard stuff, except a few parts where I change the resin with metal. Other than that, basically is just primer --> Lacquer Paint --> top Coat.

However, I really do not like resin for mechanical part; mainly due to the nature of the mold which is soft, result there r many parts that is somehow not as straight n sharp as I would like it to be......


 photo P5270099.jpg photo P5270108.jpg photo P5270105.jpg photo P5270103.jpg photo P5270102.jpg photo P5270099.jpg photo P5270098.jpg