Monday, December 16, 2013

MG 1/100 Unicorn - BLUE ; 2010 Blue Frame vs Unicorn GB

Well, as the title, this is another GB another project......

The main focus of this build is to try out full pearl color. The armor is white/silver pearl while the psycho frame is gray covered with clear added with blue reflect pearl. Other stuff is just pretty standard detailing.

The armor pearl i would say is kinda torturing as pearl, as metallic paint, or worse, amplify any imperfection on the surface. In the end, I have gotta re-do, and use flat base color to reduce the imperfection visually.

As for the psycho frame, it's a major failure. Before assembly, when u look at them, they look absolutely fabulous: areas without hilight, exactly like inner frame grey. But where there is hi light, it turns to a soft, beautiful blue shade of light.

The problem is, after assembled, the area visible is very little, and most of them r under the outter armor's shade/shadow. Besides that, the lack of curvy surface, make the reflection even harder to see.

So in the end, basically it just looks like a unicorn with grey inner frame.... T.T

For WIP #1 unicorn-wip-1
For WIP #2 unicorn-wip-2
For WIP #3 unicorn-wip-3


 photo P5242166.jpg photo P5242167.jpg photo P5242169.jpg photo P5242170.jpg photo P5242171.jpg photo P5242172.jpg photo P5242178.jpg photo P5242180.jpg photo P5242187.jpg photo P5242189.jpg photo P5242191.jpg photo P5242199.jpg photo P5242210.jpg photo P5242211.jpg photo P5242215.jpg photo P5242221.jpg photo P5242230.jpg photo P5242232.jpg photo P5242234.jpg photo P5242235.jpg photo P5242236.jpg photo P5242242.jpg photo P5242243.jpg photo P5242264.jpg photo P5242283.jpg photo P5242270.jpg photo P5242291.jpg photo P5242292.jpg photo P5242293.jpg photo P5242298.jpg photo P5242301.jpg

MG 1/100 Unicorn WIP# 2

huhu... I guess this is a diagram I was trying to explain section C design in ZeroG forum.....

A little armor seperation to show off psychoframe...... nothing much for the thigh......

Just redo a little of shape on the front skirt......

extend the inner frame that holds the psychoframe, and make the lower armor slightly thicker. All this mainly to create some visual differences...

Again.... & again....... dunno why i keep these kinda photos.....

Lengthen the manhood part.....

I seriously wanna cry..... looks like some stuff i hv put in quite some effort, but, I DONT REMEMBER  WTH is that!!!!???


Front and back

This is one of my favorite. The back skirt. Drill holes, make vents for thruster.

 photo 20jan02.jpg photo 20jan03.jpg photo 20jan04.jpg
Hohoho, just a concept. Find the light saber mechanism plus the forearm armor somehow easily transform that looks like a small crossbow.... even can put in extra ammunition from its own rifle..... Hahah


MG 1/100 Unicorn WIP# 3

Continue.........




 photo P1012054.jpg photo P1012056.jpg
Original chest part. think it's too flat and symmetrical. Gonna do something....



 photo P1012060.jpg photo P1012057.jpg photo P1012061.jpg photo P1012064.jpg
Pla-plate added to raised certain parts. The side, cut of a part from the back piece n join it with the front piece. To make the whole chest less unified n symmetrical.


 photo P1012069.jpg photo P1012066.jpg
more pla-plating......

 photo P1012055.jpg photo P1012074.jpg
Looking good......


 photo P1012070.jpg photo P1012076.jpg photo P1012072.jpg photo P1012073.jpg
The open part of the chest. Make something inspired by Zeta Gundam.


 photo P1012077.jpg photo P1012078.jpg photo P1012079.jpg photo P1012080.jpg
Since I have plan to let the unicorn carries a BFG, just prepare some inlet for 2 cable that connects the BFG with backpack. Koto parts used.


 photo P1012081.jpg
This i remember is a photo i tried to explain armor gap building in ZeroG forum.


 photo P1012084.jpg photo P1012086.jpg photo P1012085.jpg photo P1012087.jpg
Backpack done!