Aoshima 1/24 Daihatsu Copen

Finally, this little critter is considered done; after giving me hell loads of problem.

Ok, photo first, sharing later.

Car Exterior

**********************************************************************************

Front Rim & Disc Brake System

***********************************************************************************
Belakang.... :p

***********************************************************************************

Front Light & Signal Light

**********************************************************************************

Car Interior (Light Grey color scheme)

***********************************************************************************

Metal Transfer Key Hole

***********************************************************************************

Some photos on a different color background setting..... (Click to view a 800x600 full size)







**************************************************************************

Basically, there r a few mistakes n lessons learned from this build; pretty much most of them could be avoided.

The main thing caught me in surprise was the Tamiya primer; which seems to be reacting when there's a wet coat where thinner's strong. So far has never encounter this problem with Gunze's primer before.

Besides that, the fitting for this kit is not as perfect as the usual Tamiya car kit I build, especially the front windscreen. The problem, however could be easily countered by simply heat up the part n manually bend them.

Other than that, this is pretty much a very fun build, stress free n experience a few things I had never tried before.