Thursday, March 10, 2016

Kronos The Harvester - COTT Build Off WIP#5

Continue continue, from Chinese New year break......

First, use back the Kyrios front skirting; added some inner skirt or whatever longest thing underneath it. All is done in the name of good-looking... hahahah, meaning no reason.
 photo P2272603.jpg  photo P2272604.jpg  photo P2272605.jpg  photo P2272601.jpg

Next, I am using this Kotobukiya Chainsaw part. Instead of just using some mesh wire, this gives me some slight variation in the shape. The only thing is i have gotta drill hole n put metal wire in between them so they r more controlled.....

Repetitive work alert....
 photo P2262595.jpg  photo P2262596.jpg  photo P2262597.jpg

Bend it like.... how i want it to be.... muahahahahah!
 photo P2262598.jpg

Put it on....  Connecting one end to the main body inner frame and another end to the extra inner skirt.

I always do this, i dont know why. My instinct kind of construction always put me into difficult assembly potential....
 photo P2272607.jpg  photo P2272606.jpg

Connect the "leg" part n see..... damn..... 80% of the thing is not visible anymore... though that is what i wanted, but being a cheapo CINA ah pek business man, when this happen, i feel like i was cheated by myself.... feel very 唔抵。。。
 photo P2272610.jpg  photo P2272608.jpg

Ok add another one on the right side, with slightly different way to hang it...
 photo P2272611.jpg  photo P2272612.jpg

Hohohohho, at least this one can see more......
 photo P2272615.jpg

Front view.... also nothing much. Damn!
 photo P2272616.jpg

Side view and back view (Si-Fat view)
 photo P2272617.jpg  photo P2272618.jpg


Next, the scythe, the stupid scythe. Why I choose such weapon?

Basically, just free hand drawing the shape on pla plate, cut it out, smoothen it. Everything is done in the most primitive and boh tak chek way...... oh yeah, 1mm pla plate
 photo P3022623.jpg  photo P3022624.jpg photo P3022625.jpg

two pieces of pla rod, drill hole. connecting it to a round shape rod is surprisingly not as troublesome as i thought it would be....
 photo P3022626.jpg

Cut out the part, ready for insertion..... please, let the thing be as straight as possible....
 photo P3022628.jpg  photo P3022629.jpg

Huhuhhuhuh..... not bad not bad.....
 photo P3022630.jpg

This round i think i will add some mechanical parts onto the scythe instead of leaving it as a whole piece of metal. Let's hope i dont screw it up........
 photo P3022631.jpg

Btw, CNY holidays are almost over..... T.T

No comments:

Post a Comment